Home / Guides
Straight answers to the questions we are asked before every order: what it costs and why, how many nozzles, how much water, how it is installed, and what to check when importing. Written by the people who build the equipment.
There is no single price for terrace cooling, because the price is a consequence of the configuration. Here is exactly what changes it, in the order that matters.
Read the guide →Two numbers decide it: the area to be covered, and whether the nozzles cool an open area or protect a perimeter. Everything else follows.
Read the guide →Fans move air. Misting removes heat from that air. On a dry, hot terrace the difference is 5–10 °C — but the honest answer is that the two work best together.
Read the guide →Misting uses far less water than sprinklers, but the figure varies a lot by application — and by how the system is controlled.
Read the guide →Price follows the perimeter you are defending and the number of cycles you want per day — not the size of the house.
Read the guide →Safety comes from four things: what is in the tank, how it is diluted, when the system runs, and where the nozzles point. All four are design decisions, not luck.
Read the guide →A typical garden system is a one-day installation: tubing along boundaries, nozzles on posts or fence lines, pump and tank out of sight. A finished garden is not a problem.
Read the guide →The answer is arithmetic, not opinion: area × cycles × minutes per cycle, divided by the dilution. Here is how to do it in two minutes.
Read the guide →On site, price is set by how many dust sources you have to treat — not by the size of the site on the drawings.
Read the guide →Water carts are mobile and simple. Fog cannons cover more area per litre. Fixed nozzles beat both at a single source. The right answer depends on whether your dust moves.
Read the guide →In a quarry, dust control is a layout problem. Solve it at the generation point and everything downstream gets easier.
Read the guide →PM10 is the fraction that travels — and the fraction regulators measure. Suppression has to happen at the source to affect it.
Read the guide →Birds cannot sweat. Once shed temperature passes their comfort band, feed turns into heat stress and mortality rises. The design question is how to cool the air without wetting the litter.
Read the guide →Heat stress shows up in the milk tank, the feed conversion figure and the mortality line. Cooling the air is usually cheaper than treating the consequences.
Read the guide →Humidity is not one number to hold — it is a band to keep, and getting it wrong shows up as leaf disease or stalled growth.
Read the guide →Oyster, shiitake or button — the crop decides the band, and the band decides whether pinning happens on schedule.
Read the guide →Odour complaints come from the boundary, but odour is generated in specific places. Treat the sources on a cycle and the boundary looks after itself.
Read the guide →Manual spraying is cheap to start and expensive to run. Fixed atomisation costs more upfront and less every day after that.
Read the guide →Six questions, in this order. Answer them and the specification writes itself — and you will avoid the two failures that make most misting installations disappointing.
Read the guide →The equipment is rarely the risk. The risk is buying from someone who cannot supply the same nozzle in eighteen months — so check these seven things first.
Read the guide →Indian sites are usually asked to show dust control at the points where material is handled — and to do it with less water than a tanker fleet can deliver.
Read the guide →India loses birds to heat every year, and the loss is not evenly spread — it concentrates in the afternoon hours when air temperature peaks and ventilation alone stops coping.
Read the guide →The monsoon does not create more mosquitoes — it creates more breeding places. Perimeter misting deals with the adults arriving from them, on a schedule.
Read the guide →Most of the friction when importing into India is paperwork and after-sales, not the machine. Arrange these seven things and the shipment is routine.
Read the guide →In the UAE the season is long and the terrace is a revenue line. Misting is what makes those tables sellable from October through May — and, in the coastal months, what makes them dry rather than damp.
Read the guide →Gulf summer is where evaporative cooling performs best and where failures are most expensive. Dry air means the physics work in your favour — if the droplet size and water quality are right.
Read the guide →In the Gulf the water bill and the dust complaint arrive together. Source control with water mist is what makes both manageable.
Read the guide →A Gulf greenhouse is a controlled environment fighting an uncontrolled one. Fogging is one of the few cooling methods that also conditions humidity, which is what the crop actually responds to.
Read the guide →Singapore manages mosquitoes at national level, and property managers still have to keep their own grounds usable. That is the layer a fixed perimeter system covers.
Read the guide →In tropical Southeast Asia, misting is not about dry-heat cooling — it is about making a shaded terrace usable in the hours before the rain arrives.
Read the guide →Vietnam combines high temperature with high humidity — the hardest condition for evaporative cooling. It still works, but the layout and control have to respect that.
Read the guide →Australian mosquito pressure follows water, and after a wet season it follows it into the suburbs. A perimeter system is about keeping the usable part of the block usable.
Read the guide →On Australian sites two constraints dominate every dust decision: water is expensive to get to the site, and nobody is available to babysit a system.
Read the guide →A 42 °C day costs a greenhouse more than the electricity to run a cooling system ever will — provided the system is specified for the climate it is actually in.
Read the guide →European installers buy equipment, not brochures. The distributor relationship is decided by four things: branding, spare parts, documentation and lead time.
Read the guide →Southern Europe now has the climate misting was designed for: dry, hot summer afternoons when a terrace without cooling simply empties.
Read the guide →European summers now deliver the conditions that used to be exceptional. Housing designed for 30 °C is being asked to perform at 38 °C, and the loss shows up in yield, fertility and mortality.
Read the guide →In high-tech glasshouse horticulture the climate computer runs the show. The question is whether your humidification can be driven by it, precisely enough to be worth having.
Read the guide →In the south the mosquito season is not a season — it is most of the year, and the yard is where people live. A perimeter system is what makes evenings outside the norm rather than the exception.
Read the guide →Southwestern heat is dry, which is the good news: it is exactly the condition where evaporative cooling performs best, and where fans alone stop working.
Read the guide →Mine and quarry dust in South Africa is a health, community and water question at the same time. Water mist at the source answers all three at once.
Read the guide →In much of Africa the difference between a good season and a bad one is how the sheds perform in the four hottest weeks of the year.
Read the guide →Application + area in, configuration out — then a written quotation within one working day.
Send us the area, the application and your country. You will get a written quotation — pump unit, nozzle count, controls and spare parts listed separately.