The comparison is not really about chemicals — it is about consistency.
Calculate per day, not per litre bought. Manual spraying uses more chemical per effective treatment because coverage is uneven — some areas are over-wet, others missed — and it consumes operator time that a fixed system does not. A fixed system at 0.5–3 L/h of diluted deodorant on cyclic operation typically consumes less than the manual equivalent, while producing a consistent result.
Choose manual if the site is small, intermittent and has no power near the odour source. Choose fixed atomisation if the site runs daily, has neighbours, or needs a defensible operating record. Most sites that install fixed systems keep a manual back-up for the day something unexpected arrives — which is sensible.
| Atomising droplet size | 10–30 μm |
|---|---|
| Dilution | 1:200 – 1:500 |
| Deodorant consumption | 0.5–3 L/h |
| Coverage per system | 1,000–15,000 m² |
| Published performance | ammonia reduction ≥ 85% |
Figures are our published specification ranges (or general market conditions where stated). Final configuration is confirmed per project in the written quotation.
Send the area, the application and your destination port — itemised written quotation within one working day, no price list required.
Request a quotation Size my systemUsually yes. The system dilutes and atomises whatever is approved for your site; we confirm compatibility with the nozzle set and the dosing range before quoting, and we can supply chemistry with its safety data sheet if you prefer a single source.
A proportional dosing unit holds the ratio (1:200–1:500 depending on the product) as tanks are filled, so consumption stays predictable and the mixture does not drift between operators.
Yes, with frost protection for outdoor lines — draining, trace heating or indoor routing. This is part of the design for cold climates.
Full specifications on each product page.
Atomised deodorant control for waste transfer and treatment facilities
View detailsSend us the area, the application and your country. You will get a written quotation — pump unit, nozzle count, controls and spare parts listed separately.