Many Vietnamese broiler and layer houses are open-sided rather than tunnel-ventilated. Fog released centrally will drift out of the side openings, so nozzles are placed along the ridge and along the upwind side, aimed inward and slightly downward, and the system runs with whatever natural airflow the house has. This is a layout question, not a hardware question, and it is why we ask for a photo of the house rather than only its dimensions.
Adding water to already-humid air can push birds into a worse comfort zone. The controllers we supply read humidity and throttle the system back as it rises, so the installation helps in the hot dry hours of the afternoon and stays out of the way when the air is saturated.
If the litter stays dry, the system is specified and controlled correctly. If it does not, the cause is almost always droplet size or nozzle placement — coarse spray wets the floor, and the ammonia and foot problems follow. Our units run at 1–15 μm specifically so the water evaporates in the air rather than landing.
| Droplet size | 1–15 μm |
|---|---|
| Working pressure | 70–100 bar |
| Unit power | 1.5–7.5 kW |
| Coverage | 500–10,000 m² per system |
| Water consumption | 3–8 L/min |
| Control | humidity-linked, multi-zone |
Figures are our published specification ranges (or general market conditions where stated). Final configuration is confirmed per project in the written quotation.
Send the area, the application and your destination port — itemised written quotation within one working day, no price list required.
Request a quotation Size my systemYes, in the right hours and with the right control. It contributes most in the early afternoon when temperature is highest, and the humidity-linked controller stops it adding moisture when the air is already saturated.
Yes, with solenoid zoning. Each house runs its own schedule, and water is only drawn by the houses that are misting — which is what keeps consumption predictable.
Send a description of the water (hardness, iron, silt) with the enquiry. Fine nozzles need filtration — 5 μm as standard — and in some cases pre-treatment; it is far cheaper to design for that than to fix it later.
Full specifications on each product page.
Fine water mist for humidity control in sheds, greenhouses and workshops
View details
Stainless body with a ruby orifice for long, clog-free service
View detailsSend us the area, the application and your country. You will get a written quotation — pump unit, nozzle count, controls and spare parts listed separately.