
Smart High-Pressure Misting System
Landscape fog, cooling, humidification and air purification in one system
View detailsAn automated perimeter misting system that keeps mosquitoes out of gardens, courtyards, outdoor restaurants, playgrounds and camping areas. A pump pushes diluted repellent through a loop of stainless-steel nozzles mounted along the boundary of the area you want to protect.
Each cycle fills the protected zone with fine mist. Because the system works on a schedule, it clears the area before your guests arrive rather than while they are sitting there.
| Working pressure | 60–90 bar |
|---|---|
| Droplet size | 15–40 μm |
| Unit power | 0.75–3 kW |
| Coverage area | 100–2,000 m² |
| Misting medium | plant-derived essential oils / low-toxicity formulation |
| Dilution ratio | 1:50–1:100 (concentrate : water) |
| Control mode | timer / sensor / remote app |
| Spray cycle | recommended 5–10 min every 2–4 h |
| Effect on mosquitoes | mosquito repellency ≥ 90% |
| Consumables | repellent 0.3–2 L/h (depending on spray frequency) |
Specifications are for the standard configuration. Final figures are confirmed in your quotation — tell us the application and we will size it for your site.
Typical installations — your site may combine several.
Villa gardens
Outdoor restaurants
Communities
Campsites
Resorts
Playgrounds
Written out in full so you can verify before you buy.
A pump pushes a diluted repellent through stainless-steel nozzles around the perimeter of the area. Each misting cycle fills the treated zone with fine droplets that repel mosquitoes; cycles are scheduled (typically at dawn and dusk) or triggered on demand.
Systems are installed with labelled concentrate, diluted exactly as instructed, and set to run when the area is normally empty. We supply the safety data sheet for the concentrate we ship and can quote food-grade or plant-based options on request.
It depends on treated area and cycle frequency. Tell us your area in m² and the number of cycles per day and we will size the tank and give you a monthly consumption estimate in the quotation.
Yes. Tubing is normally run along walls, fences or planting beds at low level, so a finished mature garden can usually be retrofitted without excavation. Nozzles are fixed on the fence line or on slim risers.
Yes — nozzles, tubing, fittings, filters and pump spares are all available as spare-part orders, and we keep the same nozzle type available so existing pipework does not have to be redone.

Landscape fog, cooling, humidification and air purification in one system
View details
Stable 70–100 bar pump unit with multi-zone control
View detailsCosts, sizing, installation and maintenance — written by the people who build the system.
Price follows the perimeter you are defending and the number of cycles you want per day — not the size of the house.
Read the guide →Safety comes from four things: what is in the tank, how it is diluted, when the system runs, and where the nozzles point. All four are design decisions, not luck.
Read the guide →A typical garden system is a one-day installation: tubing along boundaries, nozzles on posts or fence lines, pump and tank out of sight. A finished garden is not a problem.
Read the guide →The answer is arithmetic, not opinion: area × cycles × minutes per cycle, divided by the dilution. Here is how to do it in two minutes.
Read the guide →Send us the area, the application and your country. You will get a written quotation — pump unit, nozzle count, controls and spare parts listed separately.