
Smart High-Pressure Misting System
Landscape fog, cooling, humidification and air purification in one system
View detailsHigh-pressure misting for outdoor areas that must stay usable in summer: restaurant terraces, hotel courtyards, theme-park queue lines, plazas, stadium concourses and event tents.
Nozzles are arranged so that the mist is drawn into the area by natural airflow; droplet size is tuned so the water evaporates before it reaches guests or furniture.
| Working pressure | 70–100 bar |
|---|---|
| Mist output | 5–30 L/min (adjustable) |
| Droplet size | 5–15 μm |
| Coverage per nozzle | 3–5 m² |
| Pump motor power | 1.5–7.5 kW |
| Tank capacity | 50–500 L |
| Control mode | PLC control, manual and automatic modes |
| Operating temperature range | 1 °C–60 °C |
| Noise level | ≤65 dB(A) |
| Filtration | 5 μm two-stage filtration |
Specifications are for the standard configuration. Final figures are confirmed in your quotation — tell us the application and we will size it for your site.
Typical installations — your site may combine several.
Restaurant terraces
Hotel courtyards
Plazas
Theme parks
Event tents
Sports venues
Written out in full so you can verify before you buy.
Typical working pressure is 70–100 bar for fine landscape fog (droplet size 1–15 μm) and 40–70 bar for outdoor mosquito control, where larger droplets are wanted so the repellent stays in the air longer.
One pump unit covers roughly 500–2,000 m² for cooling and landscape fog, and roughly 300–1,500 m² for mosquito control, depending on nozzle layout, pipe length and wind conditions. Send us a site plan and we will size it for you.
Under dry, hot conditions a correctly sized system typically lowers the perceived temperature in the treated zone by about 5–10 °C (9–18 °F). We will confirm the expectation for your site before you order.
Municipal tap water is normally suitable. We recommend an inlet filter (and softener where water is hard) to protect nozzles. Flow requirement depends on nozzle count — we calculate it in the proposal.

Landscape fog, cooling, humidification and air purification in one system
View details
Automated outdoor mosquito control for gardens and outdoor dining
View detailsCosts, sizing, installation and maintenance — written by the people who build the system.
There is no single price for terrace cooling, because the price is a consequence of the configuration. Here is exactly what changes it, in the order that matters.
Read the guide →Two numbers decide it: the area to be covered, and whether the nozzles cool an open area or protect a perimeter. Everything else follows.
Read the guide →Fans move air. Misting removes heat from that air. On a dry, hot terrace the difference is 5–10 °C — but the honest answer is that the two work best together.
Read the guide →Misting uses far less water than sprinklers, but the figure varies a lot by application — and by how the system is controlled.
Read the guide →Send us the area, the application and your country. You will get a written quotation — pump unit, nozzle count, controls and spare parts listed separately.