Plants respond to the relationship between temperature and humidity — the vapour pressure deficit — rather than to a fixed humidity number. Controllers that read temperature and humidity and adjust each zone accordingly are what make fogging useful rather than risky; a system holding one humidity figure all day is wrong in the morning and wrong at noon.
Gulf conditions put more suspended solids into your water and more grit onto every surface. Fine nozzles are unforgiving: a 5 μm inlet filter and a cleaning interval are specified with every greenhouse system, and where water is hard we recommend pre-treatment. It is worth deciding this at specification stage rather than during your first harvest.
Send us: greenhouse type and dimensions, crop, target temperature and humidity (or VPD band), ventilation arrangement, water source and quality, and available power. We return nozzle layout by bay, zoning, filtration and consumption figures (published range 3–8 L/min), together with the measurements your controller should be set to at each growth stage.
| Droplet size | 1–15 μm |
|---|---|
| Working pressure | 70–100 bar |
| Coverage | 500–10,000 m² per system |
| Water consumption | 3–8 L/min |
| Control | humidity-linked sensors, multi-zone |
| Filtration | 5 μm inlet filter |
Figures are our published specification ranges (or general market conditions where stated). Final configuration is confirmed per project in the written quotation.
Send the area, the application and your destination port — itemised written quotation within one working day, no price list required.
Request a quotation Size my systemYes — evaporation both absorbs heat and raises humidity, which is why the same installation is usually specified for both duties in the Gulf.
It is the main maintenance risk for fine nozzles. We specify filtration as standard and recommend pre-treatment where hardness is high; tell us the source and we will advise before the order rather than after.
Not at 1–15 μm, which evaporates in the air. Leaf wetness comes from coarse spray, and that is the specification to avoid in a greenhouse.
Full specifications on each product page.
Fine water mist for humidity control in sheds, greenhouses and workshops
View details
Landscape fog, cooling, humidification and air purification in one system
View detailsSend us the area, the application and your country. You will get a written quotation — pump unit, nozzle count, controls and spare parts listed separately.